Product ID:65, AMERCOAT THINNER
MSDS Date:03/10/1989
FSC:8010
NIIN:00N032095
MSDS Number: BPMXY

AMERON PROTECTIVE COATINGS

201 N BERRY ST
BREA, CA 92622-1020
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 714-529-1951

Preparer: H. KLINE

Cage: 0Y2E4

AMERON PROTECTIVE COATINGS

1020 BREA, CA 92622-1020 US

Telephone: 714-529-1951

Cage: 0Y2E4

4.36/KG.

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 100%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

0-900 PPM.

CAS: 71-43-2

RTECS: CY1400000

Fraction By Weight: SEE ING

OSHA PEL 10 PPM;25 PPM, C

ACGIH TLV: 10 PPM

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

LD50 LC50 Mixture:SEE INGREDIENT
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPOR, SPRAY MIST AND/OR DUST CAN BE
HARMFUL. IRRITATING TO SKIN, MUCOUS MEMBRANES. EYE & RESP SYS.
EXCESSIVE INHAL CAN CAUSE HEADAHCE, NAUSEA, DIZZINESS OR
ASPHYXIATION. REPEATED AND PROLONGED OCCUPA TIONAL OVEREXPOSURE TO
SOLVENTS IS ASSOCIATED WITH PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE. CAN BE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:HARMFUL IF SWALLOWED. OVEREXPOS CAN
DAMAGE CENTRAL NERVOUS SYSTEM. OVEREXPOSURE OR INGESTION CAN CAUSE
LUNG, KIDNEY AND/OR LIVER DAMAGE.
Medical Cond Aggravated by Exposure:RESPIRATORY, KIDNEY AND LIVER
DISORDERS.

First Aid:INHAL:PROVIDE FRESH AIR; IF BRTHG LABORED, GIVE OXYGEN OR
ARTIFICIAL RESPIRATION. SKIN:WASH THOROUGHLY WITH SOAP AND WATER.
EYE:FLUSH IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
AND GET M EDICAL ATTENTION. INGEST:DRINK 1 OR 2 GLASSES OF WATER TO
DILUTE. DO NOT INDUCE VOMITING. CONSULT PHYSICIAN OR POISION
CONTROL CENTER IMMED. TREAT SYMPTOMATICALLY.

Flash Point Method:SCC
Flash Point:78.0F,25.6C
Lower Limits:1.00%
Upper Limits:7.00%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS, AND OPEN FLAME. VAPORS MAY SPREAD LONG DISTANCES, CAUSE
FLASH FIRE OR INGNITE EXPLOSIVELY.

Spill Release Procedures:AVOID BREATHING OF VAPORS OR DUST, ABSORBENT
CLEANUP MATERIALS OR SWEEP UP. PLACE IN SEPARATE CONTAINER.
ELIMINATE ALL SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER CLOSED, UPRIGHT WHEN
NOT IN USE. STORE IN COOL, DRY, WELL VENTILATED AREA. AVOID STORAGE
TEMPERATURE ABOVE 100F.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED BREATHING OF
DUST, VAPORS OR SPRAY MIST OR CONTACT WITH SKIN AND EYES. DO NOT
WELD OR FLAME CUT AN EMTPY CONTAINER. GROUND CONTAINERS WHEN
POURING.

Respiratory Protection:NIOSH/MSHA CERTIFIED RESP. FOR CNDTNS REFER TO
NIOSH POCKET GUIDE TO CHEM HAZS DHEW NO 78-210. USE AIR-LINE RESP
IN CONFINED/RESTRICTED VENT AREAS, OR W/POLYURETHANE/ISOCYANATES.
REFER TO 29 CFR, OSHA PARTS 1910, 1915, & 1916 FOR(SUPP DATA)
Ventilation:SUFFICIENT VENT, IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAM CONC BELOW TLV LIMIT. REMOVE WELDING(SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING OR USING
WASHROOM. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
RESP PROT:COATING OPERATIONS. VENT:OR FLAME CUTTING DECOMPOSITION
PRODUCTS. REFER TO 29 CFR, OSHA PARTS 1910, 1915, AND 1916 FOR
COATING OPERATIONS.

HCC:F4
Boiling Pt:B.P. Text:282F,139C
Vapor Density:HVR/AIR
Spec Gravity:0.87
Evaporation Rate & Reference:0.70 (BUTYL ACETATE=1)
Appearance and Odor:LIQUID SOLVENT ODOR.
Percent Volatiles by Volume:100%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:BURING OR WELDING, CO AND CO2

Waste Disposal Methods:IN SEPARATE, CLOSED METAL CONTAINER IN ACORDANCE
WITH ALL APPLICABLE REGULATIONS. DISPOSE OF IN ACCORDANCE WITH
LOCAL, STATE, AND FEDERAL REGULATIONS . EFP WASTE# D001.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.